This is list of USB to ethernet adapters that work with Nexus devices, using the OTG connection: (Router) ethernet cable USB to RJ45 ethernet adapter USB to micro-USB cable when needed Nexus device (Nexus 5 D821) To get the name and chipset of the adapter I use the linux tool lsusb to view devices id an then lsusb -v -d. Ethernet Adapter A1277. idVendor 0x05ac Apple, Inc. idProduct 0x1402 Ethernet Adapter A1277. bcdDevice 0.01. iManufacturer 1 Apple Inc.

• Micro Usb To Ethernet Adaptor
• Usb 3.0 To Ethernet Adapter
• Ethernet To Usb Cable

Micro USB to Ethernet Adapter is used for connecting ZipaTile via Ethernet cable. How to set it up? Setting up is easy, just connect Ethernet cable to Micro USB to Ethernet Adapter and Micro USB to USB port on the back of the ZipaTile. This Micro-USB Ethernet adapter works with Windows and select Android devices. Depending on the firmware, compatibility can be hit or miss; therefore this product should only be used by developers.

iProduct 2 Apple USB Ethernet Adapter ASIX Electronics Corp. AX88772. idVendor 0x0b95 ASIX Electronics Corp. idProduct 0x7720 AX88772. bcdDevice 0.01.

iManufacturer 1 ASIX Elec. iProduct 2 AX88x72A. Realtek RTL8153. idVendor 0x0bda Realtek Semiconductor Corp.

idProduct 0x8153. bcdDevice 30.00.

iManufacturer 1 Realtek. iProduct 2 USB 10/100/1000 LAN. Anker A7610: Note that from what I tested it's not possible to charge the smartphone/tablet at the same time.

Micro Usb To Ethernet Adaptor

If you have an android tablet or smartphone and want to use a wired Ethernet connection then it is a easy to do. There are a few requirements. First which was released October 2015 must be installed. To see which version you have go to Settings – About Device. Previous android versions needed to be rooted which is no longer the case with Android Marshmallow 6.0.1 and above. Second a OTG to Ethernet adapter will be needed. OTG stands for On-The-Go and simply plugs into an android micro USB port.

Usb 3.0 To Ethernet Adapter

It is mainly used to such as a flash drive but also can be used for a LAN internet connection. The Ethernet adapter will transmit the signals over the network. These items can be bought separately or in one package ready to go. Not all the adapters are compatible with every android device and should be verified it works with your device.

While most will not have any problems the chipset in the adapter and the phone/tablet must be compatible. Simply be sure an adapter will work with your android device before getting one.This post contains affiliate links which at no cost to you allows us earn a commission on product purchases. Here is a OTG to Ethernet Adapter on Amazon Most android devices simply need to be plugged in and will automatically connect. Be sure to turn off your WiFi to know for sure it is only on Ethernet. Some devices require it to be in Airplane mode in settings and depends on the ROM. Summary smartphone or tablet to a Ethernet line is easy to do, with the release the android Marshmallow update. While most will not have any issues the phone or tablet must have the drivers for the chipset in the Ethernet adapter installed.

Ethernet To Usb Cable

Every manufacture customizes android for their devices and may remove or add drivers. Simply be sure to read the specs of an adapter and the reviews to be sure it works with your android smartphone or tablet.

↓. Jackie Hi, I have a Lenovo Tab 4 which i would like to connect to the internet using an RJ45 to microUSB connector. I cant get it to work and Lenovo customer support say that a wired ethernet connection is not supported – that the micro usb port is for data transfer and chargng only. However, the connector came with a driver disc. So, knowing little about how it all really works, do you know, 1 – do micro usb ports have different ‘functions’ 2 – if is it possble to install the driver that came on the disc (I’m assuming it’s the folder ‘sr9700android2.6.35’ as that’s the only driver that has android in the file name, onto the tab 4? If so, 3 – does it matter where it’s installed on the tablet?

I have used ‘send to’ to send the three driver files, Makefile, sr9700.c and sr9700.h from my laptop to the tablet and when i search for them in the storage the two numbered files have been sent to ‘Development files’. Ive tried plugging it in again using the ethernet cable but it doesn’t reconginse it (either in aeroplane mode or not). Hopefully, many thanks in advance. ↓. AI Hi, my question is: suppose I have a smartphone for which all works fine with this adaptor and my intention would be to turn it into a wifi hotspot (wifi thetering is called, I think.). Namely, to use the smartphone in order to on one side, pump the internet from the ethernet network and on the other side prolongate the signal through a phone’s private wifi network, in such a way it becomes usable by some other devices In other words make the kit: adaptor & phone replace, for instance, this: Would it be possible?

↓. Manue SCano Thanks for this useful video, your test was with a Nexus 6, I guess.

I have the same plug-able adapter, and others, and get Ethernet connection to my Motorola Moto G, Moto X Play and Moto X Style, (tablets xiaomi mipad, pipo p1 etc.) but I can´t get it working in other android mobile phones (eg. Lenovo k3note, xiaomi redmi note 2, sony xperia M, meizu m5 pro) On Motorola, android 6.0, settings, IU system config. I have the new ethernet icon, you can see in the status bar when it is ethernet connected, My question is if you now other android 6.0 (or 7.0) devices working this adapter such as Nexus Pixel, Nexus 6p, 5x, Samsung, etc.

(I know the android compatibility list for this device in www. Plugable.com), but as I want to change my mobile phone I want to know if this will work Thanks a lot.