Results 1 - 48 of 52 - CASIO 100% Original watch Instructions Manual Book Owner's Guide. Original User Guide Manual for Casio F-80 LCD Digital Watch,.

• Casio Watch Setting Time
• Casio G Shock Manual

Setting Functions There are four buttons on the edge of the case of an analog/digital Casio atomic watch. The buttons are located at 2, 4, 8 and 10 o’clock. The button in the 8 o’clock position sets the world time, alarm, date alert, time recorder, stopwatch and hand setting modes. The 2 o’clock button illuminates the display. Set your atomic watch in an area clear of large buildings or mountains to receive a strong radio signal. Setting Time Calibration You can set the Casio atomic watch to the city closest to where you will wear the watch. If you live in the United States, set the watch to the Ft.

Collins, Colo., watch station time. Hold down the button in the 10 o’clock position until “USA” is flashing.

Casio Watch Setting Time

Press the 4 o’clock button for eastern cities and 2 o’clock for western cities. For example, if you live in Las Vegas, set it to “LAX” for Los Angeles by pushing the 2 o’clock button. Press the 10 o’clock button to exit. The time re-calibrates automatically daily. Editor's Picks Alarm Setting Press the button in the 8 o’clock position to access the alarm mode. Then press the 4 o’clock button to access the alarm screens that provide four alarms and one snooze alarm. Select an alarm, such as “AL1,” and then hold down the 10 o’clock button until the hour flashes.

The 8 o’clock button allows you to move between the hour and minutes setting. The 4 o’clock button advances the time display and 2 o’clock reverses it. Once set, exit the alarm mode by pressing the 10 o’clock button. Date Alert Setting Press the button in the 8 o’clock position until you access the date alert mode on the Casio atomic watch. Select a mode such as “DA1” and then hold down the 10 o’clock button until the proper month appears.

Then push the button in the 8 o’clock position to move between the month and date. Use the 4 o’clock button to advance the date and 2 o’clock to reverse the date until the proper date is illuminated. Exit by pressing the 10 o’clock button. Stopwatch Settings Press the button in the 8 o’clock position until you find the stopwatch that illuminates “00:00.” Press the 4 o’clock button to start elapsed time, then again to stop it. Press the button in the 10 o’clock position to clear the function.

Re-set Casio Wave Ceptor NB Please note: The information below is offered in an attempt to be helpful. There is no guarantee that the instructions will apply in your case. I have merely reported what seems to work for us (until the watch next goes wrong). You use these instructions at your own risk. If in doubt compare these instructions with the instructions provided with your watch. But beware of the error found in our printed instructions mentioned Casio WV-58U-1AVEF WaveCeptor Mens Resin strap Digital Watch Faults and instructions Our experience is with the first of these two models, but it seems from Amazon reviews that exactly the same faults are experienced by a significant subset of purchasors of the second model, with metal strap. Like many of the Amazon customers who have written reviews of this watch my wife has tried two of them and had serious problems: after working perfectly for about two years, each watch started re-setting the time and date to January 2005.

Another problem is the inadequacy of the instructions - minute and barely readable, but even worse: there's a missing step, explained below. This can lead to time-wasting mistakes when setting the casio watch. So beware of these watches, unless you are willing to take risks with your money, and spend time re-setting after faults. New perspective panic. To help those whose watches need re-setting, I've given instructions below for setting time and various other features (but not all) and for turning radio mode on or off - with the missing instruction added (and indicated). For a while after the fault appeared, the watch worked well enough with radio reception turned off, as an ordinary non-radio-controlled digital watch.

Casio G Shock Manual

But after being used in non-radio mode for some time (a few months I think) it started re-setting to 2005 every now and again. After the first one did that we bought a new one, hoping we were simply unlucky with a faulty specimen. Like the first one, the new watch worked fine until some time after the guarantee period then also started re-setting itself. Again, turning off the radio controlled mode only partially fixed this problem. So my wife keeps both watches handy, and when one goes back to 2005, switches to the other, and then when she has time re-sets the errant one to current time. We shall shortly attempt to find a radio controlled watch with an equally good watch face but greater reliability.

SETTING INSTRUCTIONS FOLLOW. NOTE: the instructions refer to buttons A, B, C, D, in this layout. A B C D Contents: A: TO SET TIME MANUALLY. Hold A down until City code flashes (bottom left).

If city is not London (Lon) use button B or D (both on right) to cycle through city codes. B moves west, D moves East. Madrid (MAD) is east of London so press B, Lisbon (LIS) is west of London, so press D.

When LON is set (flashing), you can then cycle through the following operations, setting states using button C, and using buttons B and D to alter each state. (B and D make changes in opposite directions.) When you get back to City (LON flashing) press A to exit to normal mode: So: hold A (top left) for a while to get city flashing then cycle through these modes by pressing button C (bottom left) City - DST (on off auto) - 12/24hr format - Seconds - Hour - Mins - Year - Month - Day - Language (EN) - Toggle Month/Day Day/Month format - City (Exit by pressing A) In each of those setting modes: Use D to cycle between two or three options (e.g. 3 options for DST and two options for 12/24, or M/D, D/M format).

For setting seconds use D to set to 00 When there's number to set (year, month, day, etc.) Use D for +1, B for -1. The year shows as two flashing digits bottom left in year setting state. Set to 14 in 2014 When a state is set as desired press C to go to next setting mode. When you get back to City, press A to exit setting mode. You can also press A to exit to normal mode at an earlier state.

If you just want to toggle 12/24 hour format press A after setting the mode. B: TO TURN AUTO RECEIVE OFF: In standard timekeeping mode press D, displays last signal screen if any, or else: - with (GET) showing at bottom left. Hold A down until receiving indicator and current auto receive setting (ON or OFF) start to flash. (This is the auto/manual setting screen.) Press D to toggle auto receive ON and OFF. Leave in OFF mode to turn of radio control.

Press A then D to exit setting screen NB The printed instructions leave out the last 'D' bit wasting a LOT of my time! In normal mode, pressing C cycles you through these modes: World Time Mode (Don't press D or you'll have to use it to cycle all the way round the world, back to Lon.

B doesn't go back in this mode) Countdown Timer Mode (shows TMR) Stopwatch Mode (shows STW) The stopwatch lets you measure elapsed time, split times, and two finishes. Alarm Mode (shows ALM) This file is Maintained by Aaron Sloman Installed: 30 Aug 2014.